MassCops - Massachusetts Law Enforcement Network, A Mass Police Web Portal

Massachusetts Law Enforcement Network

Massachusetts Police News, Information and Discussions on MassCops

Pages: 1

Main Page Gen. 2 Glock ....rail mounts?
(Click here to view the original thread on the MassCops Message Board)

Posted by: 209

I've seen it before in a magazine but I can't find it again. Anyone know where I can get rails for my Gen. 2 glock. More specifically Im looking for the ones you glue on not the one that goes on your trigger guard. I want to put on the blackhawk light and beable to put in a serpa tac holster. Thanks!

Posted by: charger

First thing first, is this sidearm going to be used as a duty weapon? If so, I would not rely on anything be add to your glock using glue to secure it. I am a Glock armorer & I am not aware of any rail add on kit using glue, if there is one dont know if it is a good idea. The right way to go if you want a rail system is to send it to reputable company that deals with Glock product and have one permanently molded to your frame. But its not cheap. One company that I know of and have delt with can totally reshape the whole frame. If you are interested in this route let me know and I can post the info.

Posted by: KEVDEMT

you seriously want to GLUE something to your duty weapon?

please, for the safety of the public, turn in your LTC and request a desk job.

Posted by: 209

Kevdemt...its a tactical light...not like im glueing a new trigger on. if the light falls off big deal. 33 posts and your being a smart ass?

charger- could you post the info on that company. Thanks for a good informed response.

Posted by: KEVDEMT

Quote:

Originally Posted by 209

Kevdemt...its a tactical light...not like im glueing a new trigger on. if the light falls off big deal. 33 posts and your being a smart ass?

charger- could you post the info on that company. Thanks for a good informed response.

i was a smartass at birth, everyday since and with my first post here. why change something thats working for me

why dont you just buy a g3 glock and not have to worry about things falling off. or you can go the gorilla glue route. either way...

Posted by: frank

If it falls off inside a holster, the holster may no longer retain the weapon. Keep that in mind as well.

Posted by: 209

Kev- Problem with buying a G3 since the dept wont supply it is if i use it, it will be siezed and who knows when ill get it back...its also another $500 +/- i dont have to spend right now.

Frank- I actually have the blackhawk triple ret. serpa duty holster now without the light attached. The weapon does not move around at all. I do know what you mean though...I believe the uncle mikes tac/light holster would not work if you dont have the light on it.

I like chargers recomendation the best with the remolding of the weapon.

Posted by: frank

GTG then...I don't think the Safariland RLS and Raptor will retain the weapon in a level 3 (or possibly even 2) condition without the light attached.

Posted by: 209

Well i found the glue mount one I was talking about, it actually is screwed. Anyways, it would take up more room and not fit in the holster so I would need to have the weapon remolded or buy a new one anyways.

Posted by: Nightstalker

Get a M&P and your problems are solved!!!!

Posted by: charger

Sorry it took so long to get back 209. But here is the info you were looking for. The company is The Robar Companies Inc. their web site is www.robarguns.com/glockhtm . I have had a couple of guns worked on by this company and they are awesome. I had my Glock 19 redone by them. I had the rail added on and the cocking serration to the front of the slide add. I also had all the metal finishes redone with NP3. A lubeless finish, never have to use gun oil again. The gun in the photo is basically what I had done. But I kept my grip stock, did not have it reshaped and did not have the extended beaver tail added either. But I did have the trigger guard rounded. That is the NP3 finish in the photo. So check out their web page and products think this will solve your problem. If you have any question get back and hopefully I can help.

Posted by: 209

Charger- they said they don't do the re-molding anymore... Oh well. Thanks for getting back to me.

Posted by: Killjoy

Command Arms Accessories makes what you are looking for; an under-rail mount for first and second generation Glocks with no integral rail: here's the link:

http://www.commandarms.com/product.asp?pID=139&cID=52

Posted by: 209

Quote:

Originally Posted by Killjoy

Command Arms Accessories makes what you are looking for; an under-rail mount for first and second generation Glocks with no integral rail: here's the link:

http://www.commandarms.com/thumb.asp...mages/GLA1.jpg

http://www.commandarms.com/product.asp?pID=139&cID=52

The problem is that it takes up too much room, i bought one of those mounts and it wont fit in the holster....

Can you just by the gen 3 glock frame?

Posted by: Killjoy

Quote:

Can you just by the gen 3 glock frame?

No, unfortunately, the frame is in fact the "firearm", as far as the ATF is concerned, and Glock doesn't sell the frames alone. Probably your best bet is to sell your Glock and take the cash to buy a newer one, or trade yours in for a newer one.

Have you tried safariland tactical holsters? They seem like they could handle the mount plus a light.

Posted by: Killjoy

Here's another product from Brownell's that might help, although it requires permanent modification to your weapon.

http://www.brownells.com/aspx/ns/sto...20for%20GLOCK~

ma police, boston ma police, massachusetts police, massachusetts police, mass state police, mass police, ma, mass, massachusetts, massachusetts, massachutes, massachusetts law, massachusetts polece, police, officer, police officer, cops, police gear, law enforcement, police duty gear, state police, sheriff, law, police supply, police agency directory, police agency, police department, traffic officer, police dept, state trooper, dispatcher, massachusetts county sheriff, massachusetts sheriff, massachusetts department of corrections, ma doc, doc, dept of corrections, police information, civil service, ma civil service, massachusetts crime, police training, police academy, ma police academy, massachusetts officers, masscop, masscops, mpa, bpa, ibpoa, police association, massachusetts police news, massachusetts crime news, mass most wanted, police career information, police patrol, police administration, police books, crime scene training, police discussion, crime discussions, cops

About MassCops, the home for Massachusetts law enforcement.

The Massachusetts Law Enforcement Network opened in 1998 and is now a part of the New England Police Network The site is a pro-police discussion forum intended for sworn police officers and civilian law enforcement officials as well as those interested in pursuing a career in law enforcement here in Massachusetts.

The goal of The Massachusetts Law Enforcement Network is to provide an informal network of law enforcement officials here in Massachusetts for educational and informational purposes.

The forum covers many topics such as Police Related News Articles, Agency & Profession Discussions, Police Training as well as Law Enforcement Career Information.

The Massachusetts Law Enforcement Network and The New England Police Network (NEPN) and it's network sites are privately owned websites/domains and are not affiliated with or endorsed by any government association or agency.

MassCops (masscops.com) and (masscop.com) are privately owned are not affiliated with or endorsed by the Massachusetts Coalition of Police (masscop.org)

3 4 5 6 7 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 49 50 53 54 55 56 57 58 59 60 61 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 98 99 100 101 102 103 104 105 106 107 108